There are several ways you can establish a Wi-Fi connection for the HP Deskjet 2542 Printer. Wi-Fi-protected configuration technology enables printers to connect to networks quickly. You need to use the WPS press approach or the PIN approach to set up WPS. You can refer to the below areas to set up your Printer.
Step to Connect HP DeskJet 2542 Printer to Wi-Fi
You can try the proposed steps to connect your Printer to Wi-Fi and set it up. Review the instructions thoroughly at the beginning.
- You must first turn on the printer and then check whether the driver installed on the computer is updated or not.
- Next, you need to connect the PC to the wireless network you want to connect the printer to.
- Then select the cordless button on the printer’s control panel and open the cordless settings menu for the hp Deskjet 2542 wireless setup.
- Then you need to choose a Wi-Fi-protected configuration followed by push-button options. Next, you need to find the WPS button on the router as well as press it when the time is up to the printer.
- Now, open the Cordless Settings menu on the printer’s Control Panel. After that choose Wi-Fi-Protected Setup and select the PIN option.
- You will need to move down the pin you see on the printer’s control board and then type it on the wireless router.
Using the above actions, you will understand all the proper actions for hp Deskjet 2542 wireless configuration. Follow the steps, and you are ready.
Step to Setup HP Deskjet 2542 Wireless Printer in Mac
You can set up the HP Deskjet printer on wireless connectivity with the help of the below guidelines. After that, you have to use the on-screen instructions as well to simplify the cordless network link process. Listed below, you will definitely know how to connect HP Deskjet 2542 to Wi-Fi on Mac.
Power on Settings in HP Deskjet 2542 Printer
To turn on Setup on the printer, follow these steps:
- Initially, you need to activate the printer device by using the Power button of the printer. Afterward, you need to insert the ink cartridge and then pack the paper directly into the input tray.
- Now, you are ready to connect the power cord as well as complete the complete hardware setup for the correct functioning.
This is exactly how you can power setup. To recover default settings in HP Deskjet printers, you can do as described in the section below.
The default setup in HP Deskjet 2542 Printer
To Recover HP Deskjet 2542 Printer use the settings. For that follow the given steps very carefully.
- Firstly, you have to use the Power button and turn on the HP Deskjet 2542 Printer Gadget. You need to remember the following actions in order to continue with the software program installation.
- The cordless light blink is important, so you’ll need to repeat the steps until the wireless light blinks.
- Within two hours, you must terminate the software program by using the HP Automobile Wireless Connect feature.
After these actions, you will understand how to connect HP Deskjet 2542 printer settings as well as how to connect hp Deskjet 2542 to the Wi-Fi process.
HP Deskjet 2542 Printer Configuration on Mac
Most macOS and iOS support Air Print. To start the process, you need to connect to the network. For that, you are prompted to connect hp Deskjet 2542 to Wi-Fi in Mac along with the following actions below.
- First with connect to a Wi-Fi network, similar to a Mac computer. Now, you are asked to push and hold the wireless switch on the printer until you see the wireless light start blinking.
- After that, you’ll need to connect the USB wire to the back of the printer port as well as the USB port on the computer. Next, you need to open the paper or photo you want to print.
- After that, you have to click on File as well as click on Print.
- Currently, you have to click on the name of the printer in the proposed printer name checklist. If you can’t find the name of your printer, then look for it under the Nearby Printers heading.
Follow the steps above in this area, and you will understand how to connect hp Deskjet 2542 to Wi-Fi in Mac.
Steps to Connect HP Deskjet 2542 Printer to Wi-Fi on iPhone
You can use the hp Deskjet 2542 handbook for all the configuration procedures as well as directions. Nevertheless, we are here to give you the action to attach your HP Deskjet 2542 printer to Wi-Fi on your iPhone.
- Initially, you need to turn on Wi-Fi on the Apple iPhone and connect it to the local network.
- Touch the description symbols or cordless along with wireless and start the black copy button at the same time.
- After that wait for the printer to generate the wireless test report and also verify whether the printing machine is connected to the wireless network.
- At present, verify whether the printing machine is connected to the cordless network, press the cordless, and at the same time eliminate the switch to ensure that the power light flashes.
- Then wait until the wireless light flashes as well as press the WPS button on your ISP-provided device within 2 hours of the light flashing before starting the link process.
Using the actions, you will surely understand how to resolve hp printer error 0xc18a0206. Also, follow the instructions carefully.